View previous topic :: View next topic |
Author |
Message |
m38man Member
Joined: Jul 27, 2007 Posts: 4
|
Posted: Wed Sep 05, 2007 10:58 am Post subject: m38 snorkel |
|
|
Does anyone have an idea where I can get an origional or aftermarket snorkel for my m38??
Thanks |
|
Back to top |
|
|
OKCM38CDN Guest
|
Posted: Wed Sep 05, 2007 5:16 pm Post subject: |
|
|
I got my Hose (74") from John Bizal (Only one that would sell a piece long enough), he also carries the tail pipe extension for the exhaust; I got the mounting tube from Brent Mullins; and got lucky enough to find the hardware (Nuts, bots, and brackets) on ebay...
There are some folks willing to sell you the complete kit, but they are asking over $200 for it... shop around and you can find it cheaper... if you buy the pieces parts...
Hope this helps... |
|
Back to top |
|
|
Cacti_Ken Member
Joined: Apr 20, 2005 Posts: 1021 Location: Silsbee, Texas
|
Posted: Wed Sep 05, 2007 5:49 pm Post subject: |
|
|
Hal, do you have a diagram showing where the mounting brackets go? _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM |
|
Back to top |
|
|
OKCM38CDN Guest
|
Posted: Wed Sep 05, 2007 7:23 pm Post subject: |
|
|
Ken,
The support rod mounts to a 5/16 nut welded to the tub on the passenger side, there is a half round clamp that also holds it on...
There is a U shaped bracket that mounts to the fender and there are three sets of brackets that when assembled look like a figure 8 small end clamps on the support bracket and large end supports the hose... these brackets are spaced one at top, one at bottom near fender las t in the middle...
These are the mounts for the front, the rear exhaust has an L shaped bracket with a hinged loop in it to hold the tail pipe and the tail pipe is supposed to sit vertical straight up and down no tilt...
If youy need dimensions give me a week, leave for Jefferson City Friday morning and will not be able to get them till I get back...
Hope this helps... |
|
Back to top |
|
|
Cacti_Ken Member
Joined: Apr 20, 2005 Posts: 1021 Location: Silsbee, Texas
|
Posted: Wed Sep 05, 2007 8:20 pm Post subject: |
|
|
I'm in no hurry. I have the brackets and the support pipe only. I was thanking that a bracket was screwed to windshield frame near the top end to help stablize the support rod/pipe. I believe what I need is the place in the rear corner where the exhaust pipe bracket attaches. _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM |
|
Back to top |
|
|
m38man Member
Joined: Jul 27, 2007 Posts: 4
|
Posted: Sat Sep 08, 2007 5:42 pm Post subject: pics |
|
|
Anyone have close up pics of this set up? |
|
Back to top |
|
|
OKCM38CDN Guest
|
Posted: Sun Sep 09, 2007 4:39 pm Post subject: |
|
|
If they can wait till later I can post photos of mine... Just got back from Jefferson City, MO and need to put it back on... |
|
Back to top |
|
|
SteveJ Member
Joined: Jun 14, 2005 Posts: 110 Location: Calgary Alberta
|
Posted: Sun Sep 09, 2007 9:53 pm Post subject: |
|
|
I got mine from Darryl Besinger in NY. Original in the box and had all the bits for the complete Mod. _________________ SteveJ
1986 CDN Armstron MT500 dispatch Motorcycle
1986 arrow 1.75 t cargo trailer
1991 Reynolds Boughton RB44 GS TUH
1952 M38 CDN W/W (Sold)
1953 M100 CDN Trailer
1951 PE95K Genset (Sold) |
|
Back to top |
|
|
|