Create an account Home  ·  ·  Forums  ·  ·  Articles  ·  ·  Downloads  ·  ·  Photo Gallery  
Login
Nickname

Password

Don't have an account yet? You can create one here.

Navigation
· Home
· Article Archive
· Article Submit
· Downloads
· FAQ
· Forums
· Members List
· Photo Gallery
· Private Messages
· Web Links
· Your Account

Search Articles



Forums

WTB M38 distributor breaker plate tabs
Hodakaguy M38 Misc Thread
1950 M38 no reading on the dash amp meter
Transfer Case rebuild issues
Zerks causing trouble.
1952 M38 converting to 12V
M38A1 Slave Bucket location
M274 A3 Mule For Sale
flywheel advice
conversion from a 12 volt system back to a 24 volt system

Willys M Jeeps Forums


willysmjeeps.com :: View topic - wiper tee
 Forum FAQForum FAQ   SearchSearch   UsergroupsUsergroups   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

wiper tee

 
Post new topic   Reply to topic    willysmjeeps.com Forum Index -> Wanted
View previous topic :: View next topic  
Author Message
timrod
Member


Joined: Dec 11, 2006
Posts: 55
PostPosted: Mon Dec 03, 2007 7:52 pm    Post subject: wiper tee Reply with quote
I am looking for the two tees that go on the wiper pipeing ? anybody got them or tell me where .thanks tim
Back to top
View user's profile Send private message Send e-mail
wesk
Site Administrator
Site Administrator


Joined: Apr 04, 2005
Posts: 16250
Location: Wisconsin
PostPosted: Tue Dec 04, 2007 1:52 am    Post subject: Reply with quote
You see them occasionally pop up. Jonathan had a few last summer. I bought two from him.
jonathanramsdell@yahoo.com
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail Visit poster's website
OKCM38CDN
Guest
PostPosted: Tue Dec 04, 2007 5:37 pm    Post subject: Reply with quote
good luck on originals, they are very hard to find... I got lucky and found a set at a Willys reunion... You can get brass "T" for the wipers from ACE... in the plumbing section...
Back to top
Cacti_Ken
Member


Joined: Apr 20, 2005
Posts: 1021
Location: Silsbee, Texas
PostPosted: Tue Dec 04, 2007 9:48 pm    Post subject: Reply with quote
If you are talking about the two "Y" fittings that connect to the rubber vacuum hose at the wiper motor, I bought two from Brent Mullins.
_________________
Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
Back to top
View user's profile Send private message Send e-mail
timrod
Member


Joined: Dec 11, 2006
Posts: 55
PostPosted: Wed Dec 05, 2007 7:57 pm    Post subject: tees Reply with quote
Thanks guys for the replys i will ck them out.Thanks
Back to top
View user's profile Send private message Send e-mail
sergeantfirkus
Member


Joined: Oct 25, 2007
Posts: 42
Location: East Central Illinois
PostPosted: Sun Dec 16, 2007 5:15 pm    Post subject: Reply with quote
I needed a wiper "Y" also. Called a couple of the dealers with no luck. Ended up making one with some 1/4" copper tube. I have an end mill and felt like goofing off, so I took a short piece copper and clamped it in the vice at the correct angle, then took a 1/4 mill using the side of it to cut a radius in the end of the tube this formed tight saddle which I laid this over the long piece of the "Y" then soldered it. I then took a drill and drilled through complete it. Ended up taking a bit of time but this is a hobby....right?

Greg
_________________
1951 M38
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    willysmjeeps.com Forum Index -> Wanted All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001 phpBB Group
Forums ©

 



PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.