View previous topic :: View next topic |
Author |
Message |
gamillerman Member
Joined: Apr 21, 2006 Posts: 122 Location: Eden, Georgia
|
Posted: Fri Dec 08, 2006 2:41 pm Post subject: M38 head |
|
|
800376 is the correct casting number for an M38 head; right? |
|
Back to top |
|
|
kenperkins Member
Joined: Apr 14, 2005 Posts: 285 Location: Livermore Ca.
|
Posted: Fri Dec 08, 2006 11:07 pm Post subject: |
|
|
yes, and look for the water pump bypass on the front |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
|
Back to top |
|
|
gamillerman Member
Joined: Apr 21, 2006 Posts: 122 Location: Eden, Georgia
|
Posted: Sat Dec 09, 2006 4:36 pm Post subject: |
|
|
Ok thats what the number is of the head I am looking at. Havent found out yet if the bypass hole is there but is the head is the correct number the threaded hole for the bypass hose should be there.
Thanks |
|
Back to top |
|
|
gamillerman Member
Joined: Apr 21, 2006 Posts: 122 Location: Eden, Georgia
|
Posted: Sun Dec 10, 2006 3:24 pm Post subject: M38 head. |
|
|
I just recieved a photo of the 800376 head I am looking at and it does not have a hole in the front for the bypass hose. Is this possible? Though the 800376 casting was exclusive to the M38 engines. |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
Posted: Sun Dec 10, 2006 4:29 pm Post subject: |
|
|
No the 800376 casting was not exclusive to the M38 but that casting was probably available with different machining actions done on it. If Willys assigned the same part number to the head as the casting number for the M38 then that indicates the 800376 basic delivered head is as we've always seen it with the raised boss for the bypass hose drilled and tapped. If Willys had an application for the head that wasn't drilled and tapped then it would have the basic casting number on the head and a different part number in it's parts book. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php |
|
Back to top |
|
|
gamillerman Member
Joined: Apr 21, 2006 Posts: 122 Location: Eden, Georgia
|
Posted: Sun Dec 10, 2006 5:49 pm Post subject: M38 Head |
|
|
The Head has the raised boss but there is no hole there. |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16256 Location: Wisconsin
|
|
Back to top |
|
|
|