Joined: Jan 10, 2006 Posts: 136 Location: Russellville, AR
Posted: Sun Jul 16, 2006 8:45 pm Post subject: How much paint will I use?
Im getting ready to order paint for my M38. How much paint should I expect to use? I will be painting everything, tub(top and bottom), fenders, hood, tailgate, winshield frame, etc.
Not sure how much if you do it by brush, but by spraying two gallons will give you enough to do the job and some left over for touch-up, gas cans, friends parts (once they find out you have OD paint),etc. If you are starting from bare metal get a good quality primer. I used a two part epoxy primer for the big pieces and cans of self-etching priner for the small stuff.
Joined: Apr 03, 2005 Posts: 271 Location: Chester County, PA
Posted: Mon Jul 17, 2006 9:18 pm Post subject:
2 gallons is about right. Depends on your paint gun and the pressure it is set at.
Id recommend POR-15. Its pretty expensive, but is tough as nails.
I painted POR15, Red Oxide, then OD on everything. If you dont do everything in it, Id still highly recommend the wheel wells. _________________ Bob Collins
1954 M38A1 MD79056
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum