Need Some carter YS 950S Pieces / Parts Please

inkblots · Post by **inkblots** » Wed Aug 26, 2020 6:42 pm

Hi... I'm looking for a carter YS 950 S bleeder tube, needle if you have it, an intake needle screw, and spring - highlighted exploded diagrams attached (a couple of carb parts that did not come in the kit I purchased). Click on thumbs for a better view. Thank you for looking!

Post by **wesk** » Wed Aug 26, 2020 7:38 pm

Those TM 9-1826A illustrations of the M38 carb YS637S can give folks an idea what you are looking for but since the YS950S differs considerably from the YS637S I would use the ORD 9 illustration and parts list just in case.

M38A1 ORD 9 SNLG-758 Fig 08-1 YS950S carb
Bleeder tube ZZ (CAR 145-70S) & Needle YY (CAR 11A-142), Idle adjustment screw J (CAR 30A37) & Spring H (CAR 61-476).

The M38 uses a different idle screw spring.

inkblots · Post by **inkblots** » Wed Aug 26, 2020 7:58 pm

Great! Thank you very much for your help. You knew what I needed.

4x4M38 · Post by **4x4M38** » Thu Aug 27, 2020 6:53 am

Try contacting Scoutpilot. He rebuilds and sells carbs and fuel pumps.

inkblots · Post by **inkblots** » Thu Aug 27, 2020 9:03 am

Great, thank you Brian. I'll do that.