Test Tech Page

Post by **wesk** » Thu Apr 15, 2021 10:51 am

Testing, 1, 2, 3

OKCM38CDN · Post by **OKCM38CDN** » Thu Apr 15, 2021 12:16 pm

I have tried several times to post here, but it sends me to the homepage when I either preview or submit... short posts seem to do ok...

Post by **wesk** » Thu Apr 15, 2021 12:41 pm

Hal,

There is something in the body of your message that is stopping it from being posted.

I even hand typed the entire message minus the two web links and it still would not post and sent me right to the home page!

OKCM38CDN · Post by **OKCM38CDN** » Thu Apr 15, 2021 12:45 pm

Will try again... Will type from scratch (No Cut and Paste)

I tried same as you to enter it and after second line does same... to home page...

Mike_B · Post by **Mike_B** » Thu Apr 15, 2021 5:31 pm

Wes,

The flashing indicator that indicates unread messages in not working for me. Is that something I need to set up or is it on your end?

Thanks,

Mike B

Post by **wesk** » Thu Apr 15, 2021 6:03 pm

I believe you must select notices in your profile.

Mike_B · Post by **Mike_B** » Thu Apr 15, 2021 7:23 pm

OK...this is weird, but your post just showed up flashing and I didn't do anything...lol

Mike B

Post by **wesk** » Thu Apr 15, 2021 7:46 pm

Hal,

I got her posted! For some reason the web site is not allowing the word "union" in any postings. Jake is researching the problem.

Here's your new post: http://www.willysmjeeps.com/v2/modules. ... 4384#74384

OKCM38CDN · Post by **OKCM38CDN** » Thu Apr 15, 2021 8:05 pm

Who knows, Gremlins... Never had anything like this happen before...\

Thanks for the posting of the topic... I know we have been looking for these parts for a while...

whydahdvr · Post by **whydahdvr** » Fri Apr 16, 2021 7:01 am

Test post reply......