Discussion topics on Willys Overland M series vehicles
Moderators: TomM , Moderator , wesk
wesk
Site Administrator
Posts: 16413 Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:
Post
by wesk » Sun Nov 02, 2008 11:26 am
A recent post asked for folks close to the poster to contact him so he could ask for assistance. I looked up our member list and lo & behold we have 1330 members and 1042 have not listed a city, state or region for themselves. I implore each of you 1042 members to take a moment and go to your profile and edit it to include at least the state that you are located in!
In the second row of links across the top of the page:
Forum FAQ SearchSearch Usergroups Profile No new messages Log out [ wesk ]
Click on "Profile"
Scroll down to "Location" and enter your state then scroll to bottom of page and click on "Submit"
1949f1
Member
Posts: 3 Joined: Sun Jul 10, 2011 6:00 pm
Location: clinton,tn
Post
by 1949f1 » Wed Aug 03, 2011 9:16 am
i just had some time to look thru the site since i joined. i was looking at the member list and notice what you are posting about. after i saw the list i went to my profile and put in were i live. then i went searching again and found this post. it does help to know were members are from.
Texbillhs
Member
Posts: 134 Joined: Tue Apr 24, 2012 6:00 pm
Location: Pennsylvania -Avondale/Kennett Sq
Post
by Texbillhs » Sun Aug 12, 2012 5:59 pm
It you put State first then locality you can set the Member List to search a State - example Pennsylvania, Kennett Square
1952 M38
ComancheCounty
Member
Posts: 5 Joined: Sun Apr 13, 2014 6:00 pm
Location: Georgia, Richmond Hill...sometimes Texas
Post
by ComancheCounty » Thu May 01, 2014 4:58 pm
done!
bighead
Member
Posts: 59 Joined: Tue Sep 21, 2021 6:00 pm
Location: Czech Republic, Europe
Post
by bighead » Sat Oct 02, 2021 12:10 pm
I wanted to add a location, but even if I confirm with a password, it tells me: You must enter required fields.
Last edited by
bighead on Tue Oct 05, 2021 3:31 am, edited 1 time in total.
<div>Václav S.
</div><div>1951 M38
1967
</div><div>DKW-Munga F91/4</div>
wesk
Site Administrator
Posts: 16413 Joined: Sun Apr 03, 2005 6:00 pm
Location: Wisconsin
Contact:
Post
by wesk » Sat Oct 02, 2021 3:18 pm
The required fields referred to our the response blocks for the BOTT checks to make sure you are not a ghost or robot.
bighead
Member
Posts: 59 Joined: Tue Sep 21, 2021 6:00 pm
Location: Czech Republic, Europe
Post
by bighead » Sun Oct 03, 2021 2:57 am
I also filled in these fields, numbers 5 and 4, I also tried 3, but it is not possible to save changes.
Last edited by
bighead on Tue Oct 05, 2021 3:31 am, edited 1 time in total.
<div>Václav S.
</div><div>1951 M38
1967
</div><div>DKW-Munga F91/4</div>
jake138
Site Administrator
Posts: 129 Joined: Mon Nov 17, 2014 6:00 pm
Location: Connecticut
Post
by jake138 » Sun Oct 03, 2021 7:31 am
Mr. Bighead,
Try following the steps in this post:
http://willysmjeeps.com/v2/modules.php? ... ic&t=13128
If you still cannot save your changes, please send me a Private Message.
Welcome to the forums!
~Jake
Jake, Central CT
51 M38 s/n 35627
JBJeep
Member
Posts: 73 Joined: Mon Nov 15, 2021 6:00 pm
Location: NE Washington
Post
by JBJeep » Fri Dec 31, 2021 10:21 pm
I was having the same issues as "Bighead", but jake138's instructions put me on the right path.
It worked, I changed my information and added a signature.
Thanks.
1955 M38A1 MD 82551
Former owner/restorer of 1977 CJ-5, stock with factory V-8.
Used as a daily driver for seven years.
FreeinFL
Member
Posts: 9 Joined: Sun Nov 07, 2021 6:00 pm
Post
by FreeinFL » Wed Jan 19, 2022 11:19 am
Northeast FL!