wanted

bobatwarsaw · Post by **bobatwarsaw** » Tue Mar 21, 2017 8:17 pm

wanted. looking for this part, don't know the name of it

4x4M38 · Post by **4x4M38** » Tue Mar 21, 2017 9:22 pm

That's the lunette support bracket Bob.

Post by **wesk** » Tue Mar 21, 2017 11:46 pm

Bob, Just go to our downloads page and download the M100 Maint/Parts Manual:
http://www.willysmjeeps.com/v2/modules. ... it&lid=160

You'll find part numbers and stock numbers there that will make your search easier.

Fig's C-11 & C-12 0n Page G-27 and the parts listing pages are C-12, C-13 & c-14.

4x4M38 · Post by **4x4M38** » Wed Mar 22, 2017 6:38 am

Yes, that's where I found it.

I did a drive by on EBay, Midwest Military, Rapco, DeBella, AJP,
RJ Fitzpatrick and a couple of others. I did not see it for sale anywhere.

I suspect you'll just have to call a few and ask. Most have lots more
than they show online.

Take care,

billybob · Post by **billybob** » Wed Mar 22, 2017 7:28 am

I have one from a 416 [Vietnam era] trailer if it will work.

Post by **wesk** » Wed Mar 22, 2017 9:59 am

The 416 frame is wider so the V angles do not match.

billybob · Post by **billybob** » Wed Mar 22, 2017 12:39 pm

I agree on the width. Looks like the 416 is three inches wider.

billybob · Post by **billybob** » Wed Mar 22, 2017 12:43 pm

Maybe I missed it but I didn't see which trailer he had.

4x4M38 · Post by **4x4M38** » Wed Mar 22, 2017 1:24 pm

Stepping out once again onto that ledge.

A previous post:

http://www.willysmjeeps.com/v2/modules. ... highlight=

Maybe it's for a different trailer...

OKCM38CDN · Post by **OKCM38CDN** » Wed Mar 22, 2017 4:26 pm

This part is very rare and hard to find... will work on the MBT (WWII Trailer) and the M-100 Trailer...

The dual hole one is for the m-416 trailer is much more prevalent...

It will work in a pinch, but mods might need to be made or shims.

Good luck with your search, there were rumors about there being a reproduction out of the Philippines, but I have not seen any....

Post by **wesk** » Wed Mar 22, 2017 7:15 pm

Billybob,

This is an M100 trailer forum and the casting in his photo is an M100 casting.

M100 (also fits MBT)

WWII MBT & T3 bracket

M416 Bracket

Here's an outfit that lists one in their on line catalog: Front Line MV's
http://www.flmv.net/FLMV-M416.htm

billybob · Post by **billybob** » Wed Mar 22, 2017 7:59 pm

Stupid me! I should have remembered mine has two holes. I apologise for any confusion. I was just trying to help a fellow Jeeper.

4x4M38 · Post by **4x4M38** » Wed Mar 22, 2017 8:59 pm

We are all good! Help is always appreciated.

Nice find Wes.

willysmjeeps.com

wanted

wanted

Lunette holder.

Lunette holder.

Lunette holder.

Lunette holder.