WTB , Bracket, flexible hose to fender W-800756

Trip · Post by **Trip** » Mon May 13, 2019 7:52 pm

I am searching for the above bracket. Let me know if you have one or you can point me to one.

Charles

4x4M38 · Post by **4x4M38** » Mon May 13, 2019 8:51 pm

Charles,
If that’s the upside down U that holds the fording hose
to the fender make one!

Brett’s did!

Dims are in a post here. Just do a search.

Brian

4x4M38 · Post by **4x4M38** » Mon May 13, 2019 8:52 pm

Bretto!!

Post by **wesk** » Mon May 13, 2019 9:45 pm

Trip · Post by **Trip** » Tue May 14, 2019 7:58 am

Wes,

Thank you so much. Can you also tell me what the width and thickness of the strap/bracket is?

Charles

Post by **wesk** » Tue May 14, 2019 10:19 am

No. That info was photographed by me about 10-12 years ago while I still had the NOS kit. I decided against a fording kit installation on my M38 back then and sold the kit. Someone currently in possession may be able to offer those dimensions. It looks like it is probably 3/4" to 1" wide and 3/16" to 1/8" thick.

OKCM38CDN · Post by **OKCM38CDN** » Tue May 14, 2019 1:25 pm

If you can wait I can get dimensions later this week...

Jeep currently in storage, but have a parade to do Saturday if it don't rain (Severe Weather forecast)...

Trip · Post by **Trip** » Tue May 14, 2019 3:11 pm

Thanks Wes and I can wait for the measurements.

Thanks all,

Charles

4x4M38 · Post by **4x4M38** » Tue May 14, 2019 8:27 pm

1/8” thick, 1” wide.

http://www.willysmjeeps.com/v2/modules. ... highlight=