Page 1 of 1
WTB , Bracket, flexible hose to fender W-800756
Posted: Mon May 13, 2019 7:52 pm
by Trip
I am searching for the above bracket. Let me know if you have one or you can point me to one.
Charles
Posted: Mon May 13, 2019 8:51 pm
by 4x4M38
Charles,
If that’s the upside down U that holds the fording hose
to the fender make one!
Brett’s did!
Dims are in a post here. Just do a search.
Brian
Posted: Mon May 13, 2019 8:52 pm
by 4x4M38
Bretto!!
Posted: Mon May 13, 2019 9:45 pm
by wesk
Posted: Tue May 14, 2019 7:58 am
by Trip
Wes,
Thank you so much. Can you also tell me what the width and thickness of the strap/bracket is?
Charles
Posted: Tue May 14, 2019 10:19 am
by wesk
No. That info was photographed by me about 10-12 years ago while I still had the NOS kit. I decided against a fording kit installation on my M38 back then and sold the kit. Someone currently in possession may be able to offer those dimensions. It looks like it is probably 3/4" to 1" wide and 3/16" to 1/8" thick.
Posted: Tue May 14, 2019 1:25 pm
by OKCM38CDN
If you can wait I can get dimensions later this week...
Jeep currently in storage, but have a parade to do Saturday if it don't rain (Severe Weather forecast)...
Posted: Tue May 14, 2019 3:11 pm
by Trip
Thanks Wes and I can wait for the measurements.
Thanks all,
Charles
Posted: Tue May 14, 2019 8:27 pm
by 4x4M38
