1952 M38. I just added an Satrn Overdrive. I have put 1 quart and 20 ounces of gear lube after draining and installing the OD, and the lube is still not overflowing out of the fill access, which I thought was how you were supposed to know it was full. What am I doing wrong? Is this normal?
Thank You
Transfer case + Overdrive gear lube amount
Moderators: TomM, Moderator, wesk
-
ColKilgore2860
- Member
- Posts: 34
- Joined: Thu Oct 31, 2019 6:00 pm
- Location: Story, Wyoming
- Contact:
Transfer case + Overdrive gear lube amount
Adam Jahiel
Photographer
Story, Wyoming
M38A1 & M38
Photographer
Story, Wyoming
M38A1 & M38
-
wesk
- Site Administrator
- Posts: 16413
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
There is a hole between the tranny and transfer that lets the fluid transfer. It is located near the top of the divide on the right side. You have to account for this internal transfer activity. Review your service manual carefully.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php