Brake/Clutch Tube lever

Cacti_Ken · Post by **Cacti_Ken** » Mon May 08, 2006 12:41 pm

I have two large washers that go on the tube. I don't recall exactly where they go on the assembly. Also don't know if there should be more than two. If you remember or know where they go, and if I need more, your help is appreciated. I have supplied a photo of the parts I have.

Post by **Ryan_Miller** » Tue May 09, 2006 6:11 pm

Ken,

TM 9-1804B July 1952 Page 47 figure 23

There is a picutre of the assembly as installed and it looks like you got it right, but I hope someone can post here and confirm that.