“just remember the anti seize when installing the distributor.”
Thanks for the heads up.
What areas get anti seize in addition to the LPS2 & Artillery Grease? _________________ Don Alvarez
Retired HS Teacher
Central Florida
M38 Project
Joined: Oct 02, 2014 Posts: 1785 Location: South Carolina, Dorchester County
Posted: Fri Nov 05, 2021 8:15 pm Post subject:
Put some anti-seize on the area labeled in this photo as "the area that corrodes and sticks in the engine block".
Doesn't take much. A little with your finger of choice inside the top inch or so of the boss on the block and a little around the shaft in the area shown in the photo.
Give it a twist or two after you drop it in the hole, before you lock it down (after adjusting the timing).
_________________ Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
👍 Excellent.
Direct, valuable advice falls as gentile rain to a parched land. _________________ Don Alvarez
Retired HS Teacher
Central Florida
M38 Project
All times are GMT - 6 Hours Goto page Previous1, 2, 3, 4, 5, 6
Page 6 of 6
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
