My 54 M38A1 project

TGP · Post by **TGP** » Thu Jan 28, 2016 12:59 pm

Picked this jeep up New Years Day and trying to put it back together
in Military dress as much as possible.
It's been converted to 12Volts and I'm probably going to leave that.
I do have the waterproof Dist. which I will rebuild and reinstall.

Currently gathering the rear seat and hardware and the Top ,bows and brackets.

I'm learning my way through this.
Thanks for a Great Site
Tom

Edited by management.[img]http://willysmjeeps.com/v2/modules/gall ... ed.jpg[img]

TGP · Post by **TGP** » Thu Jan 28, 2016 1:08 pm

Got the Bow brackets installed as correctly as I could figure.
Also the footman loops.
All this was missing.
Tom

Edited by management.

4x4M38 · Post by **4x4M38** » Thu Jan 28, 2016 2:06 pm

Hi Tom,
Welcome!

You need to link photos with a beginning and end "img". They are different.

Begin with

4x4M38 · Post by **4x4M38** » Thu Jan 28, 2016 2:07 pm

Nice A1.

Congrats!

RICKG · Post by **RICKG** » Thu Jan 28, 2016 2:09 pm

Diggin the PW too!

TGP · Post by **TGP** » Thu Jan 28, 2016 2:17 pm

Thanks!
That's what I was missing.
My other MV's

edited this to this

Only one set of bracketed img's at each end of the link. Second [/img] will appear the on your second click on the img icon at the top of the post. Management

TGP · Post by **TGP** » Thu Jan 28, 2016 2:27 pm

Thanks for fixing the links.
I will figure it out. Everything I know is Self Taught.
My other MV's
86 M1028A2,52 M37, 65 M35A1

Tom

4x4M38 · Post by **4x4M38** » Thu Jan 28, 2016 2:28 pm

Looks like you have it bad.....

TGP · Post by **TGP** » Thu Jan 28, 2016 2:44 pm

HA!
Yup!
But it's Fun
Between the MV's and all the vintage tractors and trucks I have
Plenty to keep me busy in retirement!

http://www.t137.com/cpg/index.php?cat=10010

Thanks!
Tom

Post by **wesk** » Thu Jan 28, 2016 2:54 pm

Try referring to my photo album when looking for detailed technical photos:

http://www.willysmjeeps.com/v2/modules. ... _album.php

and this sub-album: http://www.willysmjeeps.com/v2/modules. ... _album.php

Have a member fill in the blanks for the measurements for you.

TGP · Post by **TGP** » Thu Jan 28, 2016 3:32 pm

Thanks WesK.

I have been all through your albums and a few others too.
The information you have compiled is Priceless.
New to the Jeep MD so it will be a easier road with all the help
Here

Shame there is no "Donate" link to help fund the site.
I always try to contribute to all the sites I visit either by
Knowledge when I can, and or Monetary.

TomP

RonD2 · Post by **RonD2** » Sun Jan 31, 2016 7:52 pm

Second on the "donate" button.

TGP · Post by **TGP** » Mon Feb 08, 2016 7:37 am

Picked up the Top Bows from the powder coater and installed.

Also removed the chopped up seat brackets by the former FD and
Welded in new replacements.
Tom

TGP · Post by **TGP** » Tue Feb 23, 2016 8:07 am

Well I finally got my rear seat installed.

After my seat arrived it was discovered that the frame pivot tube had been cut
Off at some point.
So after welding 1/4" back on each end it fit like it supposed to.
Thanks all for the help.
Tom

RangerF · Post by **RangerF** » Thu Feb 04, 2021 1:17 am

Hi where can I get all the hardware for the fitting of the roof and sides ?